Tips of Replacing your Garbage Disposal
It can be daunting when you are thinking of replacing you garbage disposer. People always have a trepidation when it comes to water and electricity. The sink may leak since the sink connections are unfamiliar. You should learn how garbage disposal are since it is very easy to replace you garbage disposal. You should check you old unit when you want to replace your garbage disposal unit before buying the unit. The common thing about the disposal units is that they normally jam easily hence you should check the connection of the jammed disposal. When you are replacing your garbage disposal unit, you should consider the following factors.
You should turn of your electricity. For you to be sure that the disposal unit is not connected with an electric current, you should turn off your electricity. It is very beneficial that you turn off your electricity when you want to work on your disposal unit. You should remove the cover from the disposal unit. At the base of the disposal unit is where you will find the cover. By loosening the screw, you should remove the cover of the disposal unit this is very important.
You should loosen the bolts that cover the disposal. The hose should be pulled from the fitting by loosening the hose clamp. The old unit should be removed once the bolt is lose. You should support the disposal unit from below for you to remove the disposal unit. The disposer should be rotated counterclockwise as the next step. This will be until the unit does fall away. You should remove the remainder of the drain by loosening all the three bolts.
The putty should be applied. When you want to install a new drain you should apply the putty. The putty should be rolled on the counter that is 1/2 thick. You should firmly press towards the sink hole when you stick the putty at the underside. You should then finish the drain assembly by sliding the cardboard washer while backing it up with the ring. The snapping ring should be mounted, this is a very important step. The drain should be drained by retaining the snap into the drain.
The bolts should be tightened. The bolts can be tightened by use of a screwdriver. You should snug the drain with the sink. This is important when you are looking to install a new drain. For the new disposer to be made flexible, it should be wire. This will help when it comes to upgrading the disposal. When it comes to installing the dispoer,you should bring the wires into the conductor. You will secure the conductor by this help.